Waste Incineration process flow diagram

remaining after incineration, to do environmental brick paving to the ash landfill or landfill.
Discharged from the rotary atomizer reaction tower reaction residues and fly ash collected from the baghouse, after curing chelate can enter the normal household waste landfill for landfill.


Slag and fly ash

Leachate treatment tanks, one in the oven to ensure conditions through sewage pump pressure injected into the furnace atomization incineration,
Second, after the export using the Division I independent research and development CEAB leachate treatment technology for processing,
Water can reach the national "Integrated Wastewater Discharge Standard" (GB8978-1996) standard.


Leachate

Junk in mechanical grate incinerator bed furnace through the pusher, drying section, combustion section and burnout segment constituted,
Effective incineration, furnace temperature control in general above 850 ℃, the flue gas produced in the furnace above 850 ℃ travel time by more than two seconds after the boiler exhaust,
Reduce dioxin (Dioxin) production.


Furnace denitration

High temperature steam boiler drives turbine generator for power generation, energy recovery;
The work done as a high-quality waste heat steam industrial steam supply neighboring industrial park, energy recycling.


Electricity and heat

Slag remaining after incineration, to do environmental brick paving to the ash landfill or landfill.
Discharged from the rotary atomizer reaction tower reaction residues and fly ash collected from the baghouse, after curing chelate can enter the normal household waste landfill for landfill.


Slag and fly ash

Incineration flue gas temperature, the SNCR denitration furnace, waste heat boiler heating surface heat after cooling, into the rotary atomizer reaction tower,
Rotary atomizer sprayed into the reaction tower lime mud removing flue gas hydrogen chloride, sulfur dioxide and other acid gases,
Then the flue gas into the bag filter to remove dust from the flue gas by chimney flue, smoke up to the EU 2000/76 / EC flag.


旋转雾化器

Flue gas treatment using a rotary atomizer semi-dry reaction tower + activated carbon injection and baghouse technology process, the flue gas to remove hydrogen chloride, acid gases, and heavy metals, dioxins and so on.
We use SNCR denitration furnace technology, to the diluted ammonia solution is injected into the furnace, the flue gas nitrogen oxide content is greatly reduced.
Baoan plant flue gas emissions targets far better than the national environmental emissions requirements, the main emission targets reached EU standards, each incineration line with the Shenzhen people are RC network real-time monitoring,
While taking advantage of outdoor electronic display real-time dynamic publishing index (the plants are).


Flue gas treatment

Incineration flue gas temperature, the SNCR denitration furnace, waste heat boiler heating surface heat after cooling, into the rotary atomizer reaction tower,
Rotary atomizer sprayed into the reaction tower lime mud removing flue gas hydrogen chloride, sulfur dioxide and other acid gases,
Then the flue gas into the bag filter to remove dust from the flue gas by chimney flue, smoke up to the EU 2000/76 / EC flag.


Baghouse

Incineration flue gas temperature, the SNCR denitration furnace, waste heat boiler heating surface heat after cooling, into the rotary atomizer reaction tower,
Rotary atomizer sprayed into the reaction tower lime mud removing flue gas hydrogen chloride, sulfur dioxide and other acid gases,
Then the flue gas into the bag filter to remove dust from the flue gas by chimney flue, smoke up to the EU 2000/76 / EC flag.


Wet scrubber

Incineration flue gas temperature, the SNCR denitration furnace, waste heat boiler heating surface heat after cooling, into the rotary atomizer reaction tower,
Rotary atomizer sprayed into the reaction tower lime mud removing flue gas hydrogen chloride, sulfur dioxide and other acid gases,
Then the flue gas into the bag filter to remove dust from the flue gas by chimney flue, smoke up to the EU 2000/76 / EC flag.


Furnace denitration